• Honeywell
  • Adca Valsteam
  • Spirax Sarco
  • Gestra
  • Siemens
  • Dungs
Spirax Sarco 1/2" STS17.2 compact pipeline connector steam trapping station. Stainless steel body. Screwed BSP
Stainless Steel Compact Pipeline Connector Steam Trapping Station. Single upstream isolation.
Spirax Sarco 100mm PN16 S13 Baffle-Type Seperator
The S13 separator is an SG iron baffle type separator used for the removal of entrained liquids in steam, compressed air or gas systems. The fitting of insulation jackets will increase the performance of the separator.

For full details see the data sheet.
Siemens AGA63.5A27 Heating Element
AGA63.5A27 - Heating element, for SKP15/25/55/75/SKL25
Siemens LFL1.333 110v Burner Control
Automatic burner control unit for gas / oil or dual-fuel burners of medium up to high performance. Multi-staged or modulating burners in intermittent operation mode with air pressure check for controlled air flap control.

The burner control units are tested in accordance with EN 298 and they are CE-certified on the basis of the "Gas Appliance" directives and electromagnetic compatibility.
Siemens LFL1.333 220v Burner Control
Automatic burner control unit for gas / oil or dual-fuel burners of medium up to high performance. Multi-staged or modulating burners in intermittent operation mode with air pressure check for controlled air flap control.

The burner control units are tested in accordance with EN 298 and they are CE-certified on the basis of the "Gas Appliance" directives and electromagnetic compatibility.
Siemens LAE1/1355 220v Oil Burner Controller
Oil burner controls for use with burners of any capacity in intermittent operation. For safety reasons, at least one controlled shutdown must take place every 24 hours.

The LAE1 with the associated photocell detector RAR9 is used for fully automatic
startup and supervision
- single-stage forced draft burners
- multistage forced draft burners
- modulating forced draft burners
- with any oil throughput
The design, control sequence and setting choices offered by the LAE1... enable this
burner control to be used in almost any type and size of oil-fired combustion plant.
Siemens LAL3.25 110v Oil Burner Controller
Oil burner controls
· For oil atomizing burners of medium to large capacity
· For multistage or modulating burners in intermittent operation
· With or without air pressure supervision for checked air damper control
· Flame supervision with QRB, QRC1 or RAR9
Siemens LAL2.65 110v Oil Burner Controller
Oil burner controls
· For oil atomizing burners of medium to large capacity
· For multistage or modulating burners in intermittent operation
· With or without air pressure supervision for checked air damper control
· Flame supervision
– with photoresistive detector QRB
– or blue-flame detector QRC1
– or photocell detector RAR9
Siemens LAL2.25 110v Oil Burner Controller
Oil burner controls
· For oil atomizing burners of medium to large capacity
· For multistage or modulating burners in intermittent operation
· With or without air pressure supervision for checked air damper control
· Flame supervision
– with photoresistive detector QRB
– or blue-flame detector QRC1
– or photocell detector RAR9
Siemens LAL1.25 110v Oil Burner Controller
Oil burner controls
· For oil atomizing burners of medium to large capacity
· For multistage or modulating burners in intermittent operation
· With or without air pressure supervision for checked air damper control
· Flame supervision
– with photoresistive detector QRB
– or blue-flame detector QRC1
– or photocell detector RAR9

Feel free to get in touch with our Expert team for All types of Combustion Equipment, Boiler Hire, Industrial Boiler and burner Services, and maintenance!   

Follow us on  Facebook  &  LinkedIn


Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.